Project Traxxas Drag Slash Part List And More

Below is a list of the parts used to build my phase 1 Traxxas Drag Slash. I’ll be working on making phase 2 after I get some time behind the wheel and see what it needs. Phase 1 is a basic bolt together deal that anyone can build and have a good time with. I started with the Traxxas Slash VXL because it already had the low CG chassis and VXL brushless system that I was looking for. Scroll down further to see detail photos of my build.

 

Traxxas traxxas.com

1 x Slash VXL – 58076-24

1 x High-Torque 330 Blue servo – 2250

1 x Suspension pins – 2640

1 x Bumper – 2735

1 x Suspension arms front – 2531X

1 x Suspension pins – 3740

1 x Front axles – 2437

2 x Wheel hubs hex – 1654X

1 x Steering block – 3636A

1 x Caster blocks – 2432

2 x Driveshaft assembly, rear – 6852X (Try modifying the stock shafts first.)

1 x Stub axle carriers – 3652A

1 x Turnbuckles, camber link, 36mm (rear) – 2443

1 x Body mounts – 1914R

1 x 31T pinion – 2431 (Check the stock pinion gear first. You may already have it.)

1 x 86T spur gear – 4686 (Check the stock spur gear first. You may already have it.)

2 x White spring (rear) – 7444

2 x GTR rear shocks – 7461X (You can also use a turnbuckle in the front and skip the shock. It saves weight)

2 x Rebuild kit – 5462 (For the bump stops)

1 x Suspension screw pin set – 3640

1 x Suspension arm long (rear) – 2750R

1 x Stampede body mount – 3619 (Install this upside down)

1 x Turnbuckles, camber link, 47mm (front) – 2444

1 x Toe link 55mm (steering links) – 2445

1 x Wheelie bar assembly – 3678

1 x 5000mAh 7.4v 2-Cell 25C LiPo Battery – 2842X

 

Pro-Line prolineracing.com

1 x Hoosier Drag Slick SC, 10157-17

1 x Hoosier Drag 2.2″ 2WD Drag Racing Front Tires – 10158-17

1 x Pomona Drag Spec 2.2″/3.0″ Black Wheels – 2776-03

1 x Pomona Drag Spec 2.2″ Black Front Wheels – 2775-03

 

PROTOform racepf.com

Chevrolet Corvette C7 Pro-Mod body – 1571-40

This conversion also works with the Pro-Line Super J Pro-Mod (3523-00) and 69 Chevy Nova (3531-00). If you choose to use the Pro-Line Octane (3524-00), you don’t need to narrow the suspension of the 2WD Slash. It can also be used on the Pro-Line Pro-Fusion 4×4, Traxxas Slash 4×4 and Team Associated SC10.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *